Fine-Quality High-Precision Machining From Diverse Materials


Doosan 220 Lynx

4-axis lathe with a 2” spindle bore, sub spindle, and live tooling. This machine is smaller and quicker. The sub spindle allows us to run 12’ bars automatically and complete the part using the sub spindle.

Doosan 2100Y 

4-axis, 2.500” bore lathe with live tooling and 12’ automatic bar feed.

Doosan 2100SY 

4-axis, 2.500” bore lathe with live tooling, sub spindle and a 12’ automatic bar feed.


Doosan 2500LY 

4-axis lathe with live tooling and a 3” spindle bore. This machine is capable of machining parts up to 16” in diameter and 29” long.

Doosan 2600Y (2) 

4-axis lathes with live tooling and a 3” spindle bore. One of these are equipped with a barfeed for automatic operations of raw material under 3”.

Doosan 2600SY (5)

4-axis lathes with live tooling and a 3” spindle bore. These machines are equipped with barfeeders and sub-spindles which allows us to complete a part in one operation if turning, drilling, or tapping is required on the back side of the part. We have also equipped one of these with a robotic load/unload assist.

Doosan NMV 500

3-axis cat 40 vertical milling center with 20” travel on the Y & Z-axis and 40” travel on the X-axis. This mill has faster travel times and quicker tool change times for reduced cycle times on all parts.

Doosan 5025 

This is a 3-axis cat 40 vertical mill with 50” of travel on the x-axis, 30” on the y-axis, and 25” on the z-axis. We have equipped this mill with an overhead crane for those large plate projects.

Doosan VC510 

This rotary type pallet changing vertical mill has the fastest chip-to-chip time in the pallet changing world. Our operators load parts while the mill is machining, so there is virtually no load times. This machine has 22" of travel on the x-axis, 15" on the y-axis, and 22" on the z-axis.

Doosan 6500 Mynx

This mill is a 50 taper 3-axis mill. It has a 25” x 50” table and is capable of removing a lot of material very efficiently.


Automatic CNC 

We have 2 Kasto Dual Column CNC automatic saws to increase our cutting capacity to 16”. These saws have full bundle cutting capacity and are capable of handling 24’ bars and bundles up to 5000 lb.




We manufacture parts out of many different materials. Carbon, stainless steel and aluminum are the backbone of our business. We also machine some bronze, brass and castings as well.

  • Carbon Steel
  • Aluminum
  • Stressproof Steel
  • Brass
  • Alloys
  • Stainless Steel
  • Castings
  • Forgings​


Our location is supported by many suppliers so we can provide you with a complete part while reducing shipping and lead times while keeping your costs low.

  • Welding
  • Plating
  • Bending
  • Heat Treating
  • Laser Cutting
  • Plasma Cutting
  • Powder Coating